Build Instructions

From OpenSimulator

Jump to: navigation, search

This page covers building OpenSimulator from source code on multiple platforms. Please help us keep this page up to date as the project progresses. If you just want to run OpenSimulator, Download and run the binary build instead. In the most cases, you should be fine with binaries.

Contents

Obtaining the Source Code

Check out the Download page for instructions on obtaining an OpenSimulator source release. If you want the current development code (i.e. the Git master branch) see Developer_Documentation#Source_Code_Repository_Access.

Building

Although this page is long, building is generally quite simple. See the BUILDING.txt file in the distribution itself for simplified instructions.

Version 0.9.3.0 and above

Microsoft stopped the development of .Net Framework and Mono, replacing them by new dotnet This is a significant breaking change that we try to follow on 0.9.3.0.

Get source code

get or update source from git

git clone git://opensimulator.org/git/opensim

Building on Windows

To building under Windows, the following is required:

optionally also

  • Visual Studio .NET, version 2022 or later


Create the project files running:

runprebuild.bat

Load the generated OpenSim.sln into Visual Studio and build the solution, or just run

compile.bat

to run you may also need


Configure, See Configuration.


Now just run OpenSim.exe from the bin folder, and set up the region.

Building on Linux / Mac

you will need

  • dotnet 8.0 SDK
  • libgdiplus
    • if you have mono 6.x complete, you already have libgdiplus, otherwise you need to install it using a package manager for your operating system, like apt, brew, macports, etc. For example on debian:
      • apt-get update && apt-get install -y apt-utils libgdiplus libc6-dev


Create the project files, run:

./runprebuild.sh

then run

dotnet build --configuration Release OpenSim.sln

or just

./compile.sh


Configure. See Configuration.


run ./opensim.sh from the bin folder, and set up the region

Older Versions

  Source for old .Net Framework 4.x and Mono is in branch Mono-Net4X 
  This is mostly same code as 0.9.2.2 release.

Requirements

OpenSimulator 0.9.0.x requires either

You may also need nant tool.


OpenSimulator >= 0.9.1 (including current master) requires

recommend compiling with msbuild.

Other platforms may have own mono distributions, or may need to compile mono on them.

Other libraries used by OpenSimulator can be found at our opensim-libs git repo:

git clone git://opensimulator.org/git/opensim-libs

libOpenMetaVerse used can be found at https://bitbucket.org/opensimulator/

You may need to compile them for your platform, in particular the unmanaged ones like Bullet or ODE native code libraries

MS Windows

Supported Compilers

  • Visual Studio Community 2017
  • Or any version that does support the .Net version. At least VS2010 for versions prior to 0.91, VS2015 for 0.91 and after.
  • OpenSimulator >=0.9.2.0 can compile for .Net Framework 4.8 using runprebuild48.bat instead of runprebuild.bat below and with VS2017/19/22

Compiling in an IDE

  1. Run "runprebuild.bat"
  2. Open the resulting "OpenSim.sln" in Visual Studio IDE.
  3. Select Debug or Release configuration
  4. Menu Build -> Build Solution.

Compiling at the Command Prompt

  1. Run "runprebuild.bat".
  2. Run the resulting "compile.bat" file.

Linux and Other Mono Platforms

Install dotnet under Debian/Ubuntu

For Ubuntu 22.04 LTS and higher, dotnet is available in the distribution's repos.

For Ubuntu 20.04 LTS and lower, and for all versions of Debian, add Microsoft repository to your installation :

# Get OS version info
source /etc/os-release
 
# Download Microsoft signing key and repository
wget https://packages.microsoft.com/config/$ID/$VERSION_ID/packages-microsoft-prod.deb -O packages-microsoft-prod.deb
 
# Install Microsoft signing key and repository
sudo dpkg -i packages-microsoft-prod.deb
 
# Clean up
rm packages-microsoft-prod.deb
 
# Update packages
sudo apt update

Then :

sudo apt update
sudo apt install dotnet-sdk-8.0

https://learn.microsoft.com/en-us/dotnet/core/install/linux-ubuntu
https://learn.microsoft.com/en-us/dotnet/core/install/linux-debian

Prepare to compile

To create the several project files run on the folder opensim:

 ./runprebuild.sh

Compile with Nant

On some mono versions, in particular old ones may need the use of nant to proper compile OpenSimulator, in that case just run:

 nant

Compile with xbuild

On mono versions you can just use xbuild. (msbuild is recommended for 0.9.1.0.0+)

 xbuild

xbuild is no longer recommended on mono 5.x, but currently still works (5.12)

>>>> xbuild tool is deprecated and will be removed in future updates, use msbuild instead <<<<

On more recent mono versions Release configuration may give some performance gain, but you do lose some debug capabilities. to compile Release configuration:

 xbuild /p:Configuration=Release

Compile with msbuild

For Opensim 0.9.1 you can still use xbuild but Mono recommends the use of msbuild. You might need to install the package msbuild in addition to mono-complete for that. (Currently msbuild is included if you install mono-complete, on Ubuntu, from the official mono repositories. https://www.mono-project.com/download/stable/#download-lin )

Use xbuild on the other cases as a last resort.

Recent improvements, specially on JIT runtime, justify compiling in Release configuration, but you do lose some debug capabilities.

to compile with Debug configuration:

  msbuild

to compile with Release configuration:

  msbuild /p:Configuration=Release

to compile with the debug configuration and detailed opensim.log file can then be read with a text editor:

  msbuild /p:Configuration=Debug /fileLogger /flp:logfile=opensim.log /v:d

you can specify the following values for the level of detail of the opensim.log file:

  q [quiet], m [minimal], n [normal], d [detailed] and diag [diagnostic].

To compile for .Net Framework 4.8 with mono >=6.12. you can run runprebuild48.sh instead of runprebuild.sh above. Not much gain doing that, if any.

Ahead of Time compilation (AOT)

As you all know the files *.exe and .dll created by the compiling process above do no contain native code for the machine.
With those files, the native code required by the cpu is created at runtime, as needed, in a process known as Just in Time (JIT)
It is possible to do another compile stage on those files to create native code, that will ready when the program starts. This is the Ahead of time process (AOT).
Since JIT is done at runtime, it has limited time to do extensive code optimizations, AOT on the other hand can do all.
AOT should this way be faster to load, save some the memory needed by JIT work, and reduce latency due to code generation when a new code section is needed.
This way AOT helps reduce the huge performance gap between C# and a more proper language like C++, even considering JIT can do some optimization dependent on current code execution state, that AOT can't. (if you think c# is as fast as competent c++ code, better change what you are smoking...)
In fact both .net and mono do AOT on their components during install
JIT will still be active, compiling some other code at run time. OpenSim and used .net/mono framework parts depend on it.

For Linux, 0.9.2.0 now includes scripts makeaot.sh and cleanaot.sh to help testing AOT.
Run makeaot.sh after the compile stage above, to generate the native code files. The option -O=all must be added to mono when executing opensim.exe, ex:

mono --desktop -O=all OpenSim.exe

Script cleanaot.sh removes the binary files used by AOT. You must run it if you recompile the code (to be safe even if running makeaot).
DO NOT FORGET to run makeaot.sh or cleanaot.sh after recompile!
The generated files are specific for that machine. Do not copy the native code files to other machine, unless it is absolutely identical
The original .exe and .dll are still needed

AOT is also possible in windows, but using different tools, and those add things to central repository on the machine, harder to isolate and maintain. see ngen

Macs are.. Macs.. Future models may totally forbid JIT, like Apple mobile products do. Mono AOT on current Macs may work as on Linux

In practical use, don't expect much more than a bit faster loading.
Additionally, since compilation is different, it may add new issues. So test with care
Opensim performance issues are mostly on its own code, terrible bad communications protocols, use of bad .net/mono framework code (demo quality in same cases), etc.
And of course eternally broken GC
But... well every ns counts..

Configuration

See Configuration.

Personal tools
General
About This Wiki